Do-It-Yourself Garage Door Repair Project

The garage door is a combination of hardware and an operating system. Garage door springs are used to provide power to the overhead garage doors to run whether it swings up as a single solid piece or rolls up through multiple sections. A garage door repair project is also fairly simple to perform. If you are not a handyman and don’t know much about garage doors, it is always wise to consult professional garage door services such as, garage door repair in Fort Worth to handle the job of the garage door.

Contemporary Garage Doors

Whenever a garage door become malfunctioning, it is advised to check the metal tracks of the garage door first as the mounting brackets that are used to hold the tracks along the wall often loosen up or wear out. In order to fix the issue, you just need to tighten the loose screws and bolts. You should inspect the tracks to find out the abnormal deformities on them while the garage door remains closed. If you find any dents or flattened spots on the tracks, you can fix them by pounding them out using a plastic hammer or rubber mallet. If the tracks are badly out of shape which is beyond fixing even with a hammer, then they must be replaced.

Once you make sure that the tracks are perfect to run smoothly, you should check the alignment of the tracks. They should be at the exact height along the walls.  If you find any issue, just loosen the screws and bolts holding the mounting brackets to secure the tracks to correct the alignment of the tracks. Afterward, tap the tracks gently into the correct position and re-tighten the screws and bolts inside the mounting brackets to make sure that the tracks are perfectly aligned. 

Besides that, you should inspect the garage door rollers on the tracks to make sure that they are cleaned and lubricated for easy and smooth working. If they either seem rusty or dirty, you can use any household cleaner to remove the accumulated grease and dirt to clean them properly.

Don’t forget to check the hinges as well. Once the cleaning process is done, you can do a general inspection throughout the moving hardware to make sure that there are no loose parts left and everything is tightened and secured properly.  

If you would pay a little bit more attention to the cleaning, tightening, and maintenance process of the system on regular basis, you can keep your garage door working. It will also help you to avoid several issues related to the garage doors. If some parts need replacement, you can do it in the right time frame to avoid major garage door replacement expenditure. I hope if you will follow the above-mentioned suggestions, you will be able to repair your garage door and save money.

Related Post